If you need to move heavy loads, a forklift is the perfect machine for the job. The Mitsubishi 4G64 forklift engine is a reliable and powerful engine that is perfect for handling the toughest of tasks. But before you invest in a Mitsubishi 4G64 forklift, it’s important to understand the specifications and features of this engine so you can make sure it meets your needs. This blog post will give you an overview of the key specifications and features of the Mitsubishi 4G64 forklift engine.
Table of Contents
The Mitsubishi 4G64 is a four-cylinder, four-stroke gasoline engine
It has a bore and stroke of 3.46 inches by 3.54 inches
It has a compression ratio of 8.5:1
The 4G64 produces 92 horsepower at 5,500 rpm and 119 lb-ft of torque at 3,500 rpm
The engine is fitted with a five-speed manual transmission
The Mitsubishi 4G64 has a cast iron block and cylinder head
Conclusion
The Mitsubishi 4G64 is a four-cylinder, four-stroke gasoline engine
The forklift is one of the vehicles that performs heavy duty tasks. As a result, they require powerful engines. So the Mitsubishi 4G64 is a great fit as a powerful engine. It consists of four cylinders arranged in an inline configuration.
The engine block and cylinder head are constructed from cast iron for durability and heat dissipation, making the 4G64 a dependable workhorse.
It has a bore and stroke of 3.46 inches by 3.54 inches
The Mitsubishi 4G64 is known for optimal power and torque output. This is because it is equipped with a bore and stroke of 3.46 inches by 3.54 inches. This gives the engine enough power to efficiently drive a variety of forklift applications.
This is also the same bore and stroke found in the larger 2.4L 4G63 engine, allowing for similar performance but with a smaller displacement.
It has a compression ratio of 8.5:1
The compression ratio is determined by dividing the volume of the cylinder with the piston at the bottom of its stroke by one-eight of the total volume. The compression ratio of the Mitsubishi 4G64 forklift engine is 8.5:1.
The compression ratio is directly proportional to power, so the higher the compression ratio, the greater the engine’s ability to generate power. So the high compression ratio of the Mitsubishi 4G64 engine is high enough to optimize the performance and provide an efficient combustion cycle.
Since the compression ratio is high, it aids in saving fuel and lower emissions.
The 4G64 produces 92 horsepower at 5,500 rpm and 119 lb-ft of torque at 3,500 rpm
The Mitsubishi 4G64 engine is powerful and produces 92 horsepower at 5,500 rpm and 119 lb-ft of torque at 3,500 rpm. These technical qualities are a product of the bore and stroke, number of cylinders and compression ratio.
This horsepower is crucial for the forklift. The Mitsubishi 4G64 forklift engine is also equipped with a cast iron block and cylinder head for long-lasting performance and durability.
These impressive features make the Mitsubishi 4G64 a wonderful choice for forklifts. There is an impressive performance and efficient design, so the 4G64 will suffice in lifting heavy loads and operating in tight spaces.
The engine is fitted with a five-speed manual transmission
The Mitsubishi 4G64 is equipped with a five-speed manual transmission. This type of transmission is designed to allow the driver to manually shift through the gears in order to best utilize the power of the engine.
With its five forward speeds, the 4G64 is able to adapt to different driving conditions and terrains. The transmission also allows for reverse gear which is great for backing up or maneuvering tight spaces.
In order to shift gears on the 4G64, drivers must first engage the clutch pedal and then select the desired gear with the shift lever.
The shift lever is usually located on the floor between the driver’s seat and the passenger seat. To ensure smooth gear changes, it is important that drivers press the clutch pedal all the way down before shifting gears. Additionally, drivers should wait until the engine has reached its desired rpm before releasing the clutch.
The 5-speed manual transmission of the Mitsubishi 4G64 forklift engine gives it a great deal of versatility, allowing it to adapt to a wide range of driving scenarios. By utilizing the different gear ratios, drivers can make sure they are getting the most out of their engine while also conserving fuel.
The Mitsubishi 4G64 has a cast iron block and cylinder head
The Mitsubishi 4G64 engine is made of a cast iron block and cylinder head, giving it a strong, robust build. The cast iron block is incredibly durable and resists wear, while the cylinder head ensures that air and fuel are efficiently distributed throughout the combustion chamber. This combination allows the 4G64 to deliver excellent power and torque outputs.
The cylinder head also features a number of components such as intake and exhaust valves, spark plugs, and fuel injectors which are designed to help the engine run efficiently. The intake and exhaust valves regulate the amount of air that is drawn into the engine’s cylinders during combustion. Meanwhile, the spark plugs ignite the air and fuel mixture which then causes the cylinders to fire and generate power.
The fuel injectors are responsible for precisely delivering fuel to the cylinders so that they can burn in an efficient manner.
Overall, the combination of a cast iron block and cylinder head provide the Mitsubishi 4G64 with a strong, reliable engine. This allows it to deliver great performance and long-lasting reliability.
Conclusion
Now you know the specifications of the Mitsubishi 4G64 forklift engine. It is a four cylinder- four stroke engine, having a cast iron block and cylinder head. It produces 92 horsepower at 5,500 rpm and 119 lb-ft of torque at 3,500 rpm. This has given an insight into the quality and performance the engine will provide.
